5 Ton Hydraulic Laboratory Press Vacuum Die Sets depending on the 1200 or

depending on the 1200 or 1400 option and size

The vacuum sets are made of D2 Tool Steel and operate much the same as our standard sets

We do not suggest using with a hydraulic press which does not have an accurate read out for low forces

Gross Weight: 42kg (92 lbs)

Using a  standard uniaxial die i) would not give good compaction along the length as it is so long

5 Ton Hydraulic Laboratory Press Vacuum Die Sets depending on the 1200 orHydraulic Lab Press with simple all in one design to mitigate oil leaks. Max pressing force of 5 Tons (50 kN). This press comes with a pressure gauge and has a 4. 5 inch (130 mm) opening (max die height) and max acceptable die diameter 3. 15 inch (80 mm). This press can be used for exerting sufficient force for making pellets using dies under 15 mm inner diameter. The top pressing surface on screw thread allowing quick aligning with the top of the die